• Join over 1.2 million students every month
  • Accelerate your learning by 29%
  • Unlimited access from just £6.99 per month

Product designed to hold multiple consoles and games.

Extracts from this document...

Introduction

Design Ideas Function Aesthetics Safety Ergonomic Size Weight Shape Materials Environmental Issues Recycle Reuse Reduce Economic Issues Cost Durability Self Life TOTAL Its function is to hold a console and to also hold Playstation Two Games The shape is round and long. I will be using a range of bright colours The edges will all be smooth and round so that it minimises the chance of the user getting hurt The product will have to be fairly heavy so it can withstand the weight if the console. It will be oval and long I will make the product out of recycled MDF and will use Vacuum Forming to make the game holder As the MDF is recyclable it can be used again for other things. ...read more.

Middle

these can be accessed easily or be bought at a cheap price The product is long lasting and can be worn and torn. It can be purchased at around �20-25 so all ages can afford the unit. 6/10 This product will be used to hold a PSP and also hold the separate UMD discs The unit will look rectangular with curved edges and oval / hexagonal sides There will be no sharp edges where the user can injure themselves The overall shape will be round and curvy with some rectangular edges & sides The base will be lined with fabric and it will be made out of MDF or Pine The product must have reusable parts and no environmental worries to the Global Economy The product will be portable and will be very economic. ...read more.

Conclusion

very appealing to the target market The edges will need to be smooth and there will be separating grooves As the design is big it can't be portable. It will have curvy edges to make it look unique The use of MDF will be better as it is cheap to get. Also plastic separating grooves The wood joints should be strongly attached so the unit wont break easily. This product will be quite expensive at �50 but this is as it can be used as a TV stand with DVD holder 10/10 Design Ideas Function Aesthetics Safety Ergonomic Size Weight Shape Materials Environmental Issues Recycle Reuse Reduce Economic Issues Cost Durability Self Life TOTAL The aim of this product is to hold multiple consoles and games This product will look totally unique with its curvy sides and ...read more.

The above preview is unformatted text

This student written piece of work is one of many that can be found in our GCSE Resistant Materials section.

Found what you're looking for?

  • Start learning 29% faster today
  • 150,000+ documents available
  • Just £6.99 a month

Not the one? Search for your essay title...
  • Join over 1.2 million students every month
  • Accelerate your learning by 29%
  • Unlimited access from just £6.99 per month

See related essaysSee related essays

Related GCSE Resistant Materials essays

  1. Technology Product Evalution - the dishwasher

    Three switches: operate the functions of the dishwasher. The 1st switches the dishwasher on/off, the second chooses the drying temperature of the dishes and the third selects a lower wash temperature. Control Knob: this selects the cycle of wash you would like to use as above. Factors For Specification 1.

  2. Technology Product Evalution - dishwasher.

    Three switches: operate the functions of the dishwasher. The 1st switches the dishwasher on/off, the second chooses the drying temperature of the dishes and the third selects a lower wash temperature. Control Knob: this selects the cycle of wash you would like to use as above. Factors For Specification 1.

  1. Modernism and Postmodernism in product design

    (Mattox 1995, [Online]) Now I am going to give some example to prove my definition. Alessi SpA, in Collins 1994, p.140 The first of the postmodernist design go to discuss is a set of tea and coffee service. It call Aircraft carrier. It was designed by Hans Hollein in 1983.

  2. GCSE Technology - Product Design and Research Booklet Guide

    * Would like the bench to have both armrests and a backrest. Critical Details Information From the critical details that I gathered, I found: * The average bench height is 1050mm. * The average bench length is 1980mm. * The average seat depth is 410mm.

  1. Communication of Safety In the Design Phase.

    Anderson (1992) suggested that employers report only 40% of all accidents, and that the self - employed report less than one in ten. Also until the recent introduction of legislation (RIDDOR, 1995), accident reporting suffered as a result of inconsistent and uncoordinated reporting, resulting in missing and inaccurate information.

  2. Technology Product Evalution.

    Three switches: operate the functions of the dishwasher. The 1st switches the dishwasher on/off, the second chooses the drying temperature of the dishes and the third selects a lower wash temperature. Control Knob: this selects the cycle of wash you would like to use as above. Factors For Specification 1.

  1. My aim of this experiment is to recognize which material is the greatest sound ...

    I had designed this experiment so that I could easily investigate what material is the best insulator of sound using apparatus which will distinctly produce this information, as the decibel meter which is a sophisticated apparatus I believe can instantly under the conditions tell me accurate results of each material

  2. The task has been set to make a hole punch (used to punch holes ...

    The two processes are very similar - the words that are used show which material is to be kept and which is waste (blanking - kept, piercing - waste). Strips of metal are passed between a flat-faced hardened alloy steel punch and a matching 'die' hole.

  • Over 160,000 pieces
    of student written work
  • Annotated by
    experienced teachers
  • Ideas and feedback to
    improve your own work