• Join over 1.2 million students every month
  • Accelerate your learning by 29%
  • Unlimited access from just £6.99 per month

Flow chart for producing a magazine rack. Equipment, health & safety and quality control.

Extracts from this document...

Introduction

Flow Chart ACTION EQUIPMENT HEALTH & SAFTEY QUALITY CONTROL Mark out table top and outside of drawer Ruler, square, pencil Basic PPE, blue coat, safety glasses. Be aware of others Check dimensions and measurements before cutting Cut out external shapes Tenon saw, wood work vice, spare wood as soft jaws Basic PPE + dusk mask, clamp wood securely using vice and soft jaws Keep outside of line when cutting, to allows room for wood to be sanded down Cut out internal shapes ( space so drawer can be rotated) Jig saw, 2 x G-cramp Clamp work between two benches, Basic PPE + dusk mask Keep inside of line when cutting, to allows room for wood to be sanded down Smooth external/ internal File, rough sandpaper, belt sander, clamp Basic PPE + Dusk mask Sand down to lines, giving smooth curves and edges Final Inspection ACTION EQUIPMENT HEALTH & SAFTEY QUALITY CONTROL Mark out all parts of drawer Ruler, tri- square, pencil Basic PPE, blue coat, safety glasses. Be aware of others Check all dimensions and measurements are correct Cut shapes down to size Tenon saw, router, wood work vice, spare wood as soft jaws Basic PPE + dusk mask, clamp wood securely using vice and soft jaws Make sure all parts are cut correctly , keep outside of lines when cutting external shapes, to allow room for wood to be sanded Cut wooden attachment to hold metal rod in place Tenon saw, wood ...read more.

Middle

Basic PPE + dusk mask, clamp wood securely using vice and soft jaws Cut outside the lines, to allows room for wood to be sanded down Use lathe to cut out the three 20 � wooden poles Lathe Basic PPE, mask, goggles, be aware of others around me Make sure wooden is positioned correctly in lathe Route 4mm section in each of the wooden poles to allow magazine rack to be slotted in Hand router Dusk mask, be aware of others, basic PPE Check that all routed out section are 4mm deep Sand down all parts Hand router File, rough sand paper, clamp Dusk mask, be aware of others, basic PPE Sand down to lines, making sure all surfaces are smooth Glue the wooden attachments over the wooden poles PVA glue Basic PPE, mask, goggles, be aware of others around me Check fitting are all correct before gluing WAIT Glue the two sides of the magazine rack together PVA glue, 2 x g- clamp Basic PPE, mask, goggles, be aware of others around me Check fitting are all correct before gluing WAIT ACTION EQUIPMENT HEALTH & SAFTEY QUALITY CONTROL Dry fit all parts of product to see if they fit together Basic PPE, blue coat, be aware of others Make sure all parts fit together exactly Do final dimension check to see if any parts need sanding or cutting Ruler, tri-square , pencil Basic PPE, blue coat, be aware of others Check all dimensions ...read more.

Conclusion

Attach magazine rack between the legs Glue Basic PPE, blue coat, be aware of others Make sure that magazine rack is fitted into dowels securely ACTION EQUIPMENT HEALTH & SAFTEY QUALITY CONTROL Sand Sand Paper ( P60) (P40) Basic PPE, blue coat, be aware of others Check that all parts of the product are smooth , with no rough edges, if so sand down again Base Coat Thick paint brush, paint roller, dark brown (chocolate) paint Basic PPE, blue coat, be aware of others, work in well ventilated area Check that base coats cover all parts of the product. Trying to achieve as smooth a finish as possible WAIT Sand Sand Paper ( P60) (P40 Basic PPE, blue coat, be aware of others Check that are rough edges of previous base coat are smooth, with no rough edges of corners Under coat Thick paint brush, paint roller, dark brown (chocolate) paint Basic PPE, blue coat, be aware of others, work in well ventilated area Make sure under coat covers all parts of the product, this coat should achieve a smoother finish that previous coat WAIT Sand Sand paper ( fine) Basic PPE, blue coat, be aware of others Check that are rough edges of previous base coat are smooth, with no rough edges of corners Final/ Top coat Thick paint brush, paint roller, dark brown (chocolate) paint Basic PPE, blue coat, be aware of others, work in well ventilated area Check that all painted surfaces are smooth, and resemble the desired high quality finish that client is looking for ...read more.

The above preview is unformatted text

Found what you're looking for?

  • Start learning 29% faster today
  • 150,000+ documents available
  • Just £6.99 a month

Not the one? Search for your essay title...
  • Join over 1.2 million students every month
  • Accelerate your learning by 29%
  • Unlimited access from just £6.99 per month
  • Over 160,000 pieces
    of student written work
  • Annotated by
    experienced teachers
  • Ideas and feedback to
    improve your own work